Publicaciones
3D Finite Element Analysis and Experimental Validation for the Consequent Pole PM Machine
J.T. Tapia, T.A. Lipo,
14th Conference on the Computation of Electromagnetic Fields. COMPUMAG. Saratoga Springs, NY July 2003
Sizing Equation Analysis for Field Controller PM Machines: A unified Approach
J.T. Tapia, M.Aydin, Leonardi, S. Huang, T.A. Lipo,
nternational Conference on Electrical Machines and Drives. IEMDC'03. Madison WI, June 2003.
A design approach for the CPPM Machine: A PM Machines with Extended Field Weakening Capability
J.T. Tapia, F. Leonardi, T.A. Lipo
IEEE Industry Application Society Annual Merting 2002. Pittsburg, USA Octubre 2002.
Consequent Pole Permanent Magnet Machine with Field Weakening Capability
J.A. Tapia, F. Leonardi, T.A. Lipo
International Conference on Electrical Machines and Drives. IEMDC. Cambridge MA, June 2001 (en revisión para ser publicado en el Transaction IEEE Industry Applications).
CPPM Machine: A Synchronous Permanent Magnet Machine with Field Weakening
Tapia, J.A., T.A. Lipo, F. Leonardi.
International Agean Conference on Electrical Machines and Power Electronics ACEMP'01, Turkey, June 2001.
Design and construction of a permanent
magnet axial flux synchronous generator
Wallace, R.R.; Lipo, T.A.; Moran, L.A.; Tapia,
J.A.
IEEE International Electric
Machines and Drives Conference Record, 1997.
Design
and construction of medium power axial flux induction motors
Wallace, R.; Moran, L.; Cea, G.; Perez, F.
Fifth International Conference on Electrical
Machines and Drives, 1991.
Consequent
pole permanent magnet machine with field weakening capability
Tapia, J.A.; Leonardi, F.; Lipo, T.A.
IEEE International Electric Machines and
Drives Conference. IEMDC 2001.
Control
de la Tension de Generadores Sincronicos, con corriente de Excitacion
Constante
R. Wallace C., J. Tapia L.
X Latino American Conference of Electrical Engineering. Monterrey, Mexico, 1990
Diseno
y Construccion de un Generador con Flujo Axial e Imanes Permanentes
R. Wallace, L.A. Moran and J.A. Tapia,
XI Chilean Electrical Engineering Conference, Valdivia, Chile 1996
Modelling
Magnetic Strutures with Permanent Magnet using Finite Differences Method
J. Tapia, M. Valenzuela, A. Rodriguez.
Brazilian Conference on Electromagnetism. Florianopolis, Brazil. 1995
Application
of Finite Differences Method in electrical Machines with Permante Magnetic
M. Valenzuela, J. Tapia, A. Rodriguez, J. Ruiz
XI Chilean Automation Society Conference. Concepcion, Chile, 1994
Use
a Conductor Screen to Magnetic NdFeB Magnets
R. Wallace, V. Fierro, L. Morán, T.A. Lipo.
IEEE Trans. On Magnetics, vol. 34, 1998.
Design
and Construction of a Deep Bar Axial Flux Induction Motor
R. Wallace, L. Morán, Verucchi, R. Ccisternas.
IEE Proc. B. Electric Power Applications (enviado el 15 de Marzo de 2001).
Desarrollo
de Máquinas Eléctricas Industriales con Flujo Axial
R. Wallace, L. Morán, A. Valenzuela.
Sem. IEEE Avances y Nuevas Tecnologías en Accionamientos y Equipos Eléctricos. 1994.
Construction
and Evaluation of an Anisotropic Rotor for Axial Flux Induction Motor
R. Wallace, Morán, D. Contreras et al.
Proceedings of the International Conference and Exhibition on Power Electronics Motion and Control PEMC’94, Poland. 1994.
Optimización
del Diseño de un Generador de Flujo Axial Mediante el Método de Elementos finitos
D. Rodríguez, L. Quiroz, R. Wallace.
Congreso Chileno de Ingeniería Mecánica, Stgo. 1994.
Diseño
y Construcción de un Motor de Inducción con Flujo Axial y Estator Central
R. Wallace, Contreras, L. Morán.
XI Congreso Chileno de Ingeniería Eléctrica. Punta Arenas, Nov. 1995.
Axial
Flux Electrical Machines, Construction and Design.
R. Wallace, L. Morán, A. Valenzuela.
COPPER’95, International Conference. Chile. 1995.